Teal-Sorb FR Fire Retardant Absorbent Powder for Flammable & Combustible Spills 
TEAL-SORB FR Fire Retardant Absorbent Powder is specially designed and formulated for clean-up of combustible and flammable spills. TEAL-SORB FR is a unique, engineered mineral formulated to absorb and neutralize the ignition
properties of gasoline, diesel fuel, kerosene, paint thinners, solvents, and many other flammable and
combustible liquids. Unlike clay, cellulose, peat, cotton lint/ fibers, and other agricultural based
solutions, TEAL-SORB FR Fire Retardant is formulated to absorb and suppress the combustible vapors of volatile
liquids. Even if ignition sources are present, an absorbed spill becomes almost impossible to ignite.
Should ignition occur, the explosive tendencies of many liquids are eliminated or greatly reduced, and the
flame is easily suppressed using only water! And, unlike peat, cotton lint/ fibers, and cellulose, TEALSORB FR
Fire Retardant is non-flammable and will NOT burn, further reducing the risk of fire or explosions.
Of particular interest is the lightweight and ultra absorbency characteristics of TEAL-SORB FR Fire Retardant. With an
average weight of 12 pounds per 5-gallon bag (approximately 0.80 cubic feet), TEAL-SORB FR Fire Retardant is able to
absorb up to 3 times its own weight in liquid. Flammable and combustible liquid spills are readily
absorbed, and the responder is left with a clumped material that weighs little more than the liquid that was
captured.
Use of TEALSORB, will greatly reduce your overall cost of reclamation by having the lowest treatment dosages obtainable, lowest overall mass to landfill, reduced trucking rates and will lead to the quickest clean up time.
|
|
|
|
|
|
Part#37WFR0
Teal-Sorb FR - 1 Gallon Bag |
Part#37WFR1
Teal-Sorb FR - 1 Gallon Shaker |
Part#37WFR2
Teal-Sorb FR - 2 Gallon Bag |
Part#37WFR3
Teal-Sorb FR - 5 Gallon Bag |
Part#37WFR4
Teal-Sorb FR - 5 Gallon Pail |
Part#37WFR5
Teal-Sorb FR - 30 Gallon Fiber Drum |
|
On-Line Video: Teal-Sorb Video
TEAL-SORB FR Usage Instructions:
TEAL-SORB FR is best applied to a spill by opening the container on or near the ground next to the spill.
With a stiff bristle brush or broom, push TEAL-SORB FR into the spill. Brush back and forth over the
spill in a circular motion until the spill is removed. Should flammable or combustible liquids still be
present, simply add more TEAL-SORB FR to the area and repeat the process. TEAL-SORB FR may also
be blown into or on the spill site to further suppress volatile vapors and the explosive tendencies of some
flammables. When handling absorbed flammable or combustible fluids, caution must still be exercised,
as these fluids could still present a health or explosive risk to spill responders. If in doubt, always add
more water to the absorbed fluid. Absorbed flammable or combustible liquids must then be disposed of
according to local, state, federal, and international regulations and guidelines.
TEAL-SORB FR should also be used when putting out or preventing car fires at accident sites,
decommissioning or working on fuel or oil tanks, or any application that requires the reduction of
flammable or combustible fluid characteristics.
Due to the lightweight nature of TEAL-SORB FR, the product should be applied close to the ground and
the source of the spill in extreme wind conditions.
*Never absorb Hydrofluoric Acid with any TEAL-SORB product.
Warranty Disclaimer: Because conditions of use are beyond our control, no representation or warranty is made in connection
with the use of this product. Technical information and recommendations are believed to be accurate but are not guaranteed.
|
|